How to set up our device:
.jpg) |
The stabilizer is screwed off to expose the pad holder and the pad is then attached.
|
.jpg) |
| The stabilizer is then reattached to the rest of the applicator and can be used. |
How to use our device:
 |
| The area where the allergy test will be done is cleaned. |
 |
| The applicator is placed on the area and the button on the top is pushed to inject the needles. |
 |
| The button is then released and the needles will rise off the skin. |
 |
| The applicator is removed from the skin and a matrix is left on skin to indicate where the needles were inserted. |
 |
| The stabilizer is once again removed |
 |
| The used pad is then removed into a biohazard container. |
nice. Would the stabilizer have to be removed to add the pad? Is there any way to have the pad sit up a little higher so that the ejector + stabilizer could pick it up without having to perform extra steps?
ReplyDelete